Retractable AS-I CIP Nozzle M901-0900
The RML retractable CIP Nozzle is commonly used in situations where equipment needs to be cleaned in place.
Key Features and Benefits
- Pneumatically opened and closed
- Open and closed positional feedback via AS-I communication protocol
- Integrated local LED indicators: open=green, closed=amber, red=fault
- Constructed using 304 stainless steel, fully machined externally and internally to R8 (240 grit) for compliance with hygiene standards.
- Low air consumption, up to 50% less air consumption compared with other RML nozzles
- The ASI (Actuator Sensor Interface) allows up to 62 daisy chained nozzles to provide feedback communication on a single wire pair up to 100 metres in length.
- An AS-I signal repeater can also be added for distances greater than 100 metres.
- IECEx certified variant is also available.
Type of Protection:
Ex tMarking: Model L901-220X Ex tb IIIB T55 °C Db IP65
IECEx TSADocument: IECEx Certificate of Conformity
Retractable CIP Nozzle M901-0100
The RML Retractable CIP Nozzle is commonly used in situations where equipment needs to be cleaned in place.
Key Features and Benefits
- Opened by CIP fluid pressure
- Spring closed, close rate adjustable by external flow control valve
- Clear polysulphane barrel
- 316 cast stainless steel body. Machined internally to meet hygiene standards
- 304 machined stainless steel internal components
Flow control valve
Provides adjustable drain time as dictated by system design
Clear barrel
Provides visual indication of open/close status
Retractable CIP Nozzle M901-0137
The RML Retractable CIP Nozzle is commonly used in situations where equipment needs to be cleaned in place.
Key Features and Benefits
- Pneumatically opened, spring closed
- Clear polysulphane barrel
- 316 cast stainless steel body. Machined internally to meet hygiene standards
- 304 machined stainless steel internal components
Pneumatic open
Provides facility to keep nozzle open after CIP cycle, to enable forced air drying
Clear barrel
Provides visual indication of open/close status
Retractable CIP Nozzle M901- 0200 & M901-300
The RML Retractable CIP Nozzle is commonly used in situations where equipment needs to be cleaned in place.
Key Features and Benefits
- Pneumatically opened and closed
- 316 cast stainless steel body. Machined internally to meet hygiene standards
- 304 machined stainless steel internal components and barrel
Available options
Open and closed positional feedback
Model: M901-XXXXRS
External visual indication flag
Model:
M901-0300
Positional feedback
Via externally mounted red switches
Retractable CIP Nozzle M901-0700
The RML Retractable CIP Nozzle is commonly used in situations where equipment needs to be cleaned in place.
Key Features and Benefits
- Pneumatically opened and closed
- Open/closed visual indication flag
- 316 cast stainless steel body, fully machined externally and internally to R8 (240 grit) for compliance with hygiene standards
Positional feedback
Via externally mounted red switches
Available option
Open and closed positional feedback
Model #M901-0700RS
Deluge Nozzle M901- 0800
Key Features and Benefits
- Pneumatically opened and closed
- 316 cast stainless steel body
- 180 degree fixed spray pattern
- Fail safe design
Available option
Open and closed positional feedback
Model: M901-0800RS
Fail safe design
Water pressure will open deluge nozzle even if the airlines are damaged due to fire
Adaptor Flush Style M901-0101
RML Nozzles are mounted to the duct or vessel by means of a welded adaptor manufactured from 304 stainless steel. One adaptor is required per nozzle installation.Recommended for ducts greater than 1 meter in diameter and for flat surfaces.
Adaptor Pulled T Style M901-0108
RML Nozzles are mounted to the duct or vessel by means of a welded adaptor manufactured from 304 stainless steel. One adaptor is required per nozzle installation.Recommended for ducts less than 1 meter in diameter.